
SENIS
SENIS F3A Magnetic Field Transducer
Magnetic field transducer with a detachable, fully integrated CMOS 3-axis (Bx, By, Bz) Hall probe, of which one, two or three channels are used.
ZENOTEK is the distributor of SENIS in Turkey. Our Ankara-based team provides quotes, installation, training and technical support. Swiss-made 3D Hall magnetic field probes and high-bandwidth current transducers.
Showing 41 of 406 products

SENIS
Magnetic field transducer with a detachable, fully integrated CMOS 3-axis (Bx, By, Bz) Hall probe, of which one, two or three channels are used.

SENIS
Magnetic field transducer with a fixed, fully integrated CMOS 3-axis (Bx, By, Bz) Hall probe, of which one, two or three channels are used.

SENIS
Magnetic field transducer with an integrated 2- or 3-axis Hall probe. The I3D replaces the earlier I3C model.

SENIS
The H3B is a low-noise SENIS magnetic field-to-voltage transducer with a hybrid 3-axis Hall probe and ultra-low noise and offset fluctuations.

SENIS
The SENIS K3A accurately measures the amplitude and direction of magnetic fields at cryogenic temperatures down to about 1 K.

SENIS
3-axis AC magnetic field transducer based on inductive coils with a common center for all three axes.

SENIS
The NanoVolt Amplifier NVM-01 was developed for very high resolution measurements of the magnetic flux distribution in ion and electron beam magnets with a moving wire or rotating coil.

SENIS
High-precision teslameter with an integrated C-type 3-axis Hall probe (Bx, By, Bz) and temperature sensor.

SENIS
Digital teslameter that measures three field components and calculates total field amplitude and direction at a point only 0.

SENIS
Teslameter / gaussmeter with a fully integrated 1-, 2- or 3-axis Hall probe for industrial applications.

SENIS
Handheld teslameter with touchscreen and internal battery. It measures the field at a point of 100 × 100 × 10 µm and covers a very high dynamic range, from the environmental field (~0.

SENIS
Handheld 3-axis teslameter that connects to a PC over USB. Available with the probe integrated in a rigid carbon holder or connected by a thin cable.

SENIS
Nanoteslameter with a 1-, 2- or 3-axis AMR probe for very low DC magnetic fields.

SENIS
Fast, precise 3-axis magnetic field camera that measures all three field components (Bx, By, Bz) with 16k pixels.

SENIS
High-end, standard-size all-in-one magnetic field mapper with a 3-axis Hall probe for 3D field measurement.

SENIS
Large-size version of the MMS-1A-RS mapper with an extended scanning volume for large magnets and rotors.

SENIS
Compact, light 3D magnetic field mapper for cylindrical magnets: rotors, disc, ring and segment magnets.

SENIS
SENIS defectoscope systems are quality control tools for production lines that detect cracks and inhomogeneity in magnets and in non-magnetized blanks.

SENIS
Clamp-on, closed-loop current transducers for 100 A to 10 kA with total accuracy better than 0.

SENIS
Open-loop, high-sensitivity clamp-on microammeter that measures direct currents down to 1 µA.

SENIS
SENIS C, H, K, L and A series fully integrated 3-axis Hall probes with a field-sensitive volume of only 100 × 10 × 100 µm.

SENIS
The 3MH2 is a digital magnetic field transducer that measures all three field components and calculates the total field amplitude and direction at a point only 0.

SENIS
Magnetic field transducer with an integrated 1-axis Hall probe that measures the field component perpendicular to the probe plane (By), with very low noise and offset fluctuations.

SENIS
Magnetic field transducer with a fully integrated CMOS 1-axis (By) Hall probe, offering very high spatial resolution and a frequency bandwidth from DC up to 75 kHz.

SENIS
Very robust and thin hybrid ceramic Hall probe with integrated discrete Hall sensors.

SENIS
3-axis sliding Hall probe for in-contact measurements. The field-sensitive spot sits only 0.

SENIS
SENIS 3-axis Surface Precision Hall probes are designed for magnet inspection close to the magnet surface.

SENIS
Multichannel magnetic field transducer that combines up to 10 transducers in one unit and works with any F3B or F1A Hall probe type.

SENIS
Three-component reference magnet for highly accurate in-situ validation of magnetic field sensors, teslameters and mappers.

SENIS
Beyond its standard mappers, SENIS builds magnetic field mapping systems for special requirements: very large rotors, very low or AC fields, in-contact nanoscale mapping and clean-room environments.

SENIS
The SENIS Model HH-HIGH is a single-axis coil pair in Helmholtz geometry that provides a large volume of highly uniform magnetic field.

SENIS
The SENIS Model HHROT-1 is a single-axis Helmholtz coil pair giving a relatively large volume of highly uniform field; SENIS can assemble customized 1D and 3D Helmholtz coil geometries and sizes.

SENIS
A zero-gauss chamber for cancelling the offset of Hall probes and magnetic field transducers.

SENIS
Converts the differential signal of the transducer to a single-ended signal for use with oscilloscopes and data acquisition systems; 3DSA-05 for 3-axis and 1DSA-05 for 1-axis transducers.

SENIS
Positions the SENIS Hall probe C when measuring magnetic fields in air gaps of undulator systems or between rotors and stators of large generators, and protects the probe.

SENIS
Probe head support for SENIS Hall probe types A and E.

SENIS
Hard ceramic probe holders for applications that require very accurate probe position, such as insertion devices and undulators; the Hall probe is firmly fixed in a ceramic plate.

SENIS
Output signal cable accessory for the F3B analog magnetic field transducers.

SENIS
Output signal cable suitable for SENIS 3DACMT magnetic transducers.

SENIS
Output signal cable for SENIS H3A magnetic transducers.

SENIS
Output signal cable available in 2 m, 5 m and 10 m lengths (CO20, CO50, CO100), suitable for SENIS F3A, F1A and I1A magnetic transducers.
SENIS products are distributed in Turkey by ZENOTEK, based in Ankara; sales, quotes, installation and technical support are handled by ZENOTEK.
ZENOTEK is the distributor for SENIS in Turkey. You can add the products on this page to your quote list and request pricing with a single form, or contact us directly at +90 (312) 219 6259 / info@zenotek.com.
ZENOTEK is SENIS’s distributor in Turkey.
41 products across Test & Measurement. Example models: SENIS F3A Magnetic Field Transducer, SENIS F3B Magnetic Field Transducer, SENIS I3D Magnetic Field Transducer.
SENIS’s official manufacturer website is https://www.senis.swiss. For pricing, technical support and service in Turkey, contact ZENOTEK.