Menu
– Temperature Control: 65K – 350 K (with temperature controller option)
– Easy LN2 Filling & Vacuum options
– 84 Pin LCCC Socket configured for the ISC9705 and 9803 POIC with 32 copper coaxial lines
– DB 25 style hermetic connector
Please send us e-mail for your 2D or 3D drawing request.
– OFHC Copper Bobbin
– Annealed
– Superconductive Wire Winding Core
Please send us e-mail for your 2D or 3D drawing request.
– Dry backing vacuum system
– 10-8 mbar base vacuum
– With LN2 trap
– Easy to use
Please send us e-mail for your 2D or 3D drawing request.
– Chamber Body Manufactured From 304 Stainless Steel Plate
– 10-6 mbar base vacuum
– Tightness < 1×10-8 Pa m3/s
– 2x ISO 100 view port
– Fully controlled by PLC
Please send us e-mail for your 2D or 3D drawing request.
– Designed for special experiment
– 4.2K base temperature
– 0.4W @ 4.2K cooling power
Please send us e-mail for your 2D or 3D drawing request.
– Capable to work under 10-6 mbar base vacuum
– Temperature range : 6.5K – 350K
– Optional heater & temperature control electronics
– Optional Rotator assembly
Please send us e-mail for your 2D or 3D drawing request.
– Cryogenic cooler cooling capacity measurement set-up
– Capacity measurement under 1×10-6 mbar vacuum condition
– 2 sensor verification test between 50K to 325K
– Special 10W heater assembly on the 20 g test base
Please send us e-mail for your 2D or 3D drawing request.
– 10K Sample Cooler for Vibrational Sample Magnetometer
– CCR and Oven option
– This option was created to simplify the insertion and removal of two temperature option in to VSM
providing rapid, repeatable sample positioning in all configuration
Please send us e-mail for your 2D or 3D drawing request.
– Our service department can configure up to 44m3/h helium recovery system.
Istanbul University
Gebze Technic University
– Working under UHV vacuum condition
– Water cooled aluminum material base cooler
– CF100 Viewport for beam monitoring
– Beam stopper and position monitor function together
Please send us e-mail for your 2D or 3D drawing request.
© All rights reserved @ Zenotek 2020
You must be logged in to post a comment.